Bunker Hill Security Wireless Security Alert System

Writer by Admin

A wireless security alert system allows you to monitor activity and receive instant notifications when motion is detected. Bunker Hill offers reliable, easy-to-install wireless systems to enhance security.

This comprehensive guide will explore Bunker Hill wireless alert systems – from components and features to setup, usage tips, placement strategies and troubleshooting. Follow these recommendations to select and install a system tailored for your property’s needs and budget.

Let’s dive in!

An Introduction to Bunker Hill Wireless Security Alert Systems

Bunker Hill’s wireless security alert systems provide instant notifications when visitors or intruders are detected on your property. Key components include:

Wireless motion sensors – Detect movement up to 70 ft away and transmit alert signals to the receiver. Run on batteries for flexible placement.
Wireless receiver/base station – Sounds an audible alarm and displays visual indicators when motion is detected by paired sensors. Also battery powered.
Battery power – Sensors and receiver run on batteries for quick installation without wiring. Standard alkaline batteries can provide up to 1-2 years of life.

These systems can be installed in minutes and provide an affordable solution to monitor driveways, entryways, perimeter fences and other access points around your home or business. Let’s look at setup.

Setting Up Your Bunker Hill Wireless Alert System

Installation is quick and easy following these steps:

Unpack and Inventory Components

Remove all system parts from packaging and verify you have the correct quantity of motion sensors and receiver base station.
Typically an owner’s manual, mounting hardware, batteries and any necessary tools will also be included.

Insert Batteries

Following polarity guidance, insert new high quality alkaline or lithium batteries into each motion sensor and the receiver base station.

Mount and Position Sensors

Using included mounting brackets, attach sensors 6-7 ft off the ground aimed at the detection area on stable surfaces like eaves, fence posts or lighting poles.
For indoor use, sensors can simply sit on flat surfaces like shelving aimed at entry doors or hallways.

Pair Components

Set a pairing code on both the receiver and sensors by adjusting dials or pushing buttons to select the matching channel.
Confirm the receiver sounds an alarm when movement is detected in front of sensors. The system is now active.

Adjust Sensor Angles and Settings

Pan and tilt sensors to optimize motion detection range coverage. Refer to manual for optimal positioning guidance.
Adjust sensitivity settings to avoid false triggers if needed.

And that’s it – your alert system will now issue real time notifications for any detected activity!

Professional Tips for Optimal Alert System Placement

Proper placement is crucial for your system’s performance. Follow these expert tips:

Set drive way sensors 10-15 feet off the ground angled downward slightly to detect vehicles.
Position entryway and gate sensors 6-7 feet high aimed at the area someone would walk through.
For large open yards, place multiple sensors every 20-30 feet along the inside of fencing aimed out.
Sensors should cover approximately a 70 degree field of view or 35 feet from a distance of 70 feet.
Avoid aiming sensors at dense vegetation or trees that can falsely trigger them.
Mount securely on stable posts or poles to prevent shifting and adjustments over time.

Taking time to optimize sensor positions gives you the best chance of reliably detecting threats.

Maintenance Tips for Your Wireless Security Alert System

Follow these tips to keep your system functioning properly year-round:

Periodically clean sensors with a soft cloth to prevent dirt buildup from obstructing the lens and impacting detection accuracy.
Test detection range seasonally and adjust positions if needed for full coverage as vegetation grows or other obstructions arise.
Replace alkaline batteries every 1-2 years or when low battery is indicated to maintain continuous power.
Bring battery operated components indoors during extreme cold weather to extend battery life.
Ensure that sensors remain securely attached to avoid shifting out of position over time.

With some simple periodic maintenance, your wireless alert system will keep working flawlessly.

Troubleshooting Common Issues

In case issues arise with your security alert system, try these troubleshooting tips:

No audible alarms from receiver base station

Check that the batteries have sufficient charge and replace if depleted.
Ensure the base station volume control dial is turned up to an audible level.
Test at a close range to verify the components are paired properly.

No response when motion is detected

Make sure batteries in both the sensors and receiver have adequate power. Replace if needed.
Adjust the sensitivity dial on sensors to increase detection range if desired.
Re-pair system components in case connection was lost. Refer to owner’s manual for details.

Frequent false alarms are triggered

Reposition sensors away from areas causing inadvertent triggers like vegetation moving in wind.
Adjust sensitivity dial to reduce detection range and prevent false alarms.

Catch issues early before faulty batteries or positioning causes larger failures. Check your owner’s manual for additional troubleshooting tips.

Maximizing Your Alert System with Expansion

For comprehensive monitoring, build out a complete system with multiple sensors covering all vulnerable zones:

Install sensors at all driveway and walkway entrances to detect approaching visitors or intruders.
Position sensors along fence lines and barriers to determine if a perimeter is breached from any direction.
Mount additional sensors near sheds, detached garages, or pool gates to catch trespassers.
Consider adding integrated security cameras at key points to visually verify what triggered the alerts.
Post signage about active surveillance to benefit from enhanced crime deterrence.

Layering multiple sensors creates a robust web of monitoring and detection.

Affordable Protection with Bunker Hill Wireless Alert Systems

Maintaining awareness of activity and unexpected visitors at your home or business provides invaluable peace of mind. Bunker Hill wireless alert systems offer a fast, affordable way to establish this first line of defense.

Follow this guide to determine the ideal system components, installation spots, usage practices and troubleshooting techniques for your property. Soon you’ll be able to respond immediately to threats as they occur.

Protect what matters most with robust alert systems from Bunker Hill – the trusted name in reliable, DIY-friendly security for over 30 years. Get complete protection with complete awareness!